Unterfahrschutz

Der Xtrem AXP Racing Unterfahrschutz unterscheidet sich von der MX / SX Reihe. Es beinhaltet einen vollständigen Schutz des Rahmens bis unterhalb der Fußrasten. Es umschließt auch vollständig die Wasserpumpe und schützt das Rahmengestänge dank seiner zusätzlichen Dicke (16 mm insgesamt unterhalb des Gestänges) Gesamtgewicht: 1.550Kg Das Design ermöglicht den Wechsel des Ölfilters und das Ablassen des Öls, ohne die Platte zu entfernen Polyethylen ist ein Material, das 40% leichter als Aluminium ist, sich nicht verformt, keine Vibrationen erzeugt und mit der Zeit besser altert

Full engine protection  Protects engine block, side engine case and frame on enduro bikes High Density Polyethylene, 6mm thickness, cut and heat formed 40% lighter than 4mm thick aluminium No deformationsNo vibration Easy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included  

Protect engine block and frame on motocrossPolyethylen high density, 6 mm thickness, cut and heat formedMore enveloping than MX skid plateLighter than Enduro engine guard40% lighter than aluminium 4 mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification (hardware kit and instructions included)

Protect engine block and frame on motocrossPolyethylen high density, 6 mm thickness, cut and heat formedMore enveloping than MX skid plateLighter than Enduro engine guard40% lighter than aluminium 4 mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification (hardware kit and instructions included)

Der Motorschutz von AXP ist zum Schutz des unteren Teils Ihres Motorrads unerlässlich. Das für diesen Schutz verwendete HDPE (hoch dichtes Polyethylen) ist leichter als Aluminium und Stöße sind weniger zu sehen. Schutz des Typs Enduro für diese Disziplin Schützt die Unterseite des Motors, die Abdeckungen und den Rahmen gegen Steinschlag Schraubensatz zur Montage im Lieferumfang

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Der Motorschutz von AXP ist zum Schutz des unteren Teils Ihres Motorrads unerlässlich. Das für diesen Schutz verwendete HDPE (hoch dichtes Polyethylen) ist leichter als Aluminium und Stöße sind weniger zu sehen. Schutz des Typs Enduro für diese Disziplin Schützt die Unterseite des Motors, die Abdeckungen und den Rahmen gegen Steinschlag Schraubensatz zur Montage im Lieferumfang

Vollständiger Schutz für Ihren Motor Schützt die Unterseite des Motors, die seitlichen Abdeckungen und den Rahmen von Enduro-MotorrädernHoch dichtes Polyethylen einer Stärke von 60/10, zugeschnitten, heißgeformt und verschweißt Aus einem StückDie Herstellung erfolgt im Heißformverfahren, sodass die Schützer einen großen Bereich abdecken40 % leichter als Aluminium (Stärke 4mm) Weist Stöße ab Sieht lange gut aus Verursacht keine Vibrationen Einfache Montage auf vorhandenen Befestigungspunkten; keine Bohrarbeiten und keine Änderung des Motorrads (Lieferung mit Schraubensatz und Installationsanleitung)In Frankreich handgefertigt

SCHWARZ

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included

Der Unterfahrschutz Enduro von AXP schützt den gesamten unteren Bereich der Maschine: unterer Motor, Gehäuse und Rahmen.PE-HD 4mm schwarzProfil-DesignBelüftete Bereiche für eine bessere MotorkühlungGeringeres Gewicht: leichter als ein Unterfahrschutz aus AluBietet den für den Enduro-Einsatz erforderlichen SchutzInkl. Schraubenkit

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included

The new KTM 790 AXP skid plates are available !Made from HDPE plastic 8mm thick, our protection is fitted independently from the engine block.4 fixations points to the front and 2 aluminium parts to the rear, fixed on the footpegs bottom. This combo will offer a secure and strong fitment without any risk for your engine and cases.It protects also the tank with a side coverage. An « anti mud » plate is included in the package to avoid mud accumulation inside of the skid plate. A decal kit is supplied for an aesthetic touch !Weight : 3.2Kg

The new KTM 790 AXP skid plates are available !Made from HDPE plastic 8mm thick, our protection is fitted independently from the engine block.4 fixations points to the front and 2 aluminium parts to the rear, fixed on the footpegs bottom. This combo will offer a secure and strong fitment without any risk for your engine and cases.It protects also the tank with a side coverage. An « anti mud » plate is included in the package to avoid mud accumulation inside of the skid plate. A decal kit is supplied for an aesthetic touch !Weight : 3.2Kg

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection !  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 4mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modificationHardware kit and instructions included

Full engine protection  Protect engine block, side engine case and frame on enduro bikesPolyethylen high density, 6mm thickness, cut and heat formed40% lighter than aluminium 8mm thicknessNo shock memoryNo vibrationEasy mounting on the OEM brackets without drilling or bike modification Hardware kit and instructions included