Werkzeug

Push rod for fly-wheel puller, protects the end of the crankshaft if it is equipped with an oil nozzle. M14x1,25

Set of 6 aluminium drive flanges with different size to install bearings and seals. Ø 40 to 65 mm

Steering tube bearing installer on the triple clamps,   Suitable for all the type of bearingsSupplied with 3 adaptorsFor bearings with inner Ø of 25 - 26 - 28 - 29 - 30 mm (1, 1-1/8 and 1-3/8)

To disassemble the steering stem bearing cups.  Diameter 30 to 68 mm

Tools with expansion end to take out the bearing cups from the steering tube.

Tools with expansion end to take out the bearing cups from the steering tube.

Micrometer piston locking for ignition timming for 2T engines.  Thread: M14 x 1,25

Mini chain press tool to mate the 2 chain link plates.Technical characteristics:Capacity: 520 to 530.Caution: does not rivet the chain.

Engine Leaks Test, allows you to find leaks from Valves, Rings or gaskets...Gauge indicate the Percentage or Pressure (PSI) of leaking.An air supply from your compressor can also prove a potentiel outside engine leak. Included:  GaugeM14/M18 HoseM12 and M10 adaptersExpansion ConnectorInstruction Manual  

For 8944988

For 8944988

Blocking key to maintain the clutch hubs, flywheels, gears, sprockets, etc. during the lock and unlock the nuts. Maximum opening: 130 mm

Universal fly-wheel puller with 2 anchors point. Mini / maxi distance: 32 to 50mmDelivered with 2 screws M6 x 1.00 length 30mm

Fly-wheel puller with 3 anchors point. Delivered with 3 screwsInner Ø 48 mm/Outer Ø 75 mmCompatible with Minarelli, Suzuki, Yamaha engines

Fly-wheel puller with 3 anchors point and 4 slots.  Delivered with 3 screws M6x1.00 length 30 mmCompatible with Minarelli, Suzuki, Morini engines

Fly-wheel puller with 3 anchors points. Delivered with:3 screws M6x1.00 length 25mm3 screws M8x1.25 length 40mmCompatible with Yamaha, Kawasaki jet-ski, Sachs engines

Fly-wheel puller with 3 anchors point and push rod puller. Delivered with:3 screws M8 x 1.25 length 100 mm3 screws M8 x 1.25 length 150 mmCompatible with Yamaha engines

Ducati

Peugeot

For cycle pedals