Handwerkzeuge

Wheel axle socketFor Ducati

Wheel axle T-handle wrench For Ducati with Ohlins fork

Wheel axle T-Handle wrenchFor Ducati 1098/1198/848

T-handle wrench Ø25mm For Ducati 999, 998, 996, 916, 620SS, ST4

Werkzeuge für Öldichtungen leicht und ohne Beschädigung einsetzen.

Werkzeuge für Öldichtungen leicht und ohne Beschädigung einsetzen.

T-handle damper wrenches designed to hold the cartridge during assembly & disassembly.

Dämpferschlüssel mit T-Griff zum Festhalten der Kartusche bei Montage und Demontage.

Spark plug sockets with rubber plug retainer.

High quality 9 pc. 1/4 inch hex-drive metric-socket bit setIncludes sizes 5, 5.5, 6, 7, 8, 9, 10, 12 & 13mm Sockets are constructed from Chrome-Vanadium (CR-V) alloy steel for excellent strength and durabilityMagnet inside sockets retains bolt head or nut in socketDurable black finishIncludes convenient holder to keep bits organized 

Tire inflation is often complicated by brake calipers or special rim’s shapes that block the access. Motion Pro created a pivoting angled head design tool that allows access to difficult to reach tire valves.1/4"" NPT female inlet allows use of common air hose couplings and fittings.

Wide blade screwdriver for removing caps crankcase. Width blades: 16 - 22 - 38 mm

Flat slot for special carburator screwdriver, optimal for air/mixture setting, or for idle.

Screwdriver equipped with conical point for grabs the sheet metal end-cap on filter. Reduces potential damage to the engine cases.

Brass blade included safely removes paper gaskets from aluminum engine cases Steel blade included for difficult to remove paper gaskets Narrow, angled blades designed specifically for small, thin engine cases Convenient blade storage in handle Ergonomic billet aluminum handle

Specifically made to safely remove countershaft seals with a diameter of 29 mm to 47 mmWorks on off road, street and ATV enginesUnique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extractionDurable steel construction

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 424 mm ID x 30 mm ODSimilar to Honda tool p/n 07716-0020100 for oil filters and clutch nuts on most Honda models

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 420.5 mm ID x 26 mm ODEquivalent to Honda tool p/n 07VMA-MBB0100

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 420 mm ID x 25 mm ODEquivalent to Honda tool p/n 07716-0020100 in 20mmAllows you to unlock the Honda locking nut 90231-KY4-900

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 4Side 1: 20 mm ID x 26 mm ODSide 2: 30.5 mm ID x 39 mm ODEquivalent to Kawasaki tool p/n 57001-1450 & réf. 57001-1597

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 4Side 1: 36.6 mm ID x 50 mm ODSide 2: 25.6 mm ID x 33.8 mm ODEquivalent to Suzuki tool p/n 09940-14970

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 433 mm ID x 43 mm ODEquivalent to Suzuki tool p/n 09940-14940

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 4Side 1: 14 mm ID x 20 mm ODSide 2: 26.5 mm ID x 34 mm ODEquivalent to Suzuki tool p/n 09940-14980 & 09940-14990

Slot socket for lock and unlock the slot nuts as clutch hub nut, chassis nut, etc.  Number of pins: 637 mm ID x 42 mm ODEquivalent to Yamaha tool p/n YM-01507