Handwerkzeuge

Outside Circlips® plier, 45° angled tips. Bits Ø1,3mm opening 10 to 25mmPVC Handle granite slipLength: 145mm

Inside Circlips® plier, 45° angled tips. Bits Ø2,2 mm opening 40 to 100mmPVC Handle granite slipLength: 215mm

For Circlips® 3 to 200 mm.Piano wire tips: high distortion resistance.Long 10° angled tips for optimum circlip holding.Identification colour code: saves time.Grips in anti-slip granite PVC.

Outside Circlips® plier, straight tips. Bits Ø1,3mm opening 10 to 25mmPVC Handle granite slipLength: 150mm

Inside Circlips® plier, straight tips. Bits Ø2,2mm opening 40 to 100mmPVC Handle granite slipLength: 215mm

Cutter with snap-off blades.Ergonomic soft ABS handle.Stainless steel blade guide.Automatic blade lock.2-blade cartridge.Integral blade snapper.

New head design to increase durability and cutting capacityCutting edges designed to cleanly cut all types of wire: soft wires and modern materials to a maximum piano wire specification of: - 192A.16CPE : 2.0mm 210 kg/mm² - 192A.18CPE : 2.2mm 205 kg/mm² - 192A.20CPE : 2.5mm 200 kg/mm²High Mechanical advantage due to off-set rivet and cutting edge geometry reducing effort.High durability Carbon alloy steel, with induction hardened cutting edges.Bi-Material ergonomic grips resistant to chemical agents featuring: - Return spring - Tether ready point (Tether point adds 10mm to nominal lenght)Chrome finish for corrosion resistance  

Torque Wrench Accuracy: ± 4%. Easy read out. Dual scale capability for multi unit use. 2 values N.m and Ft.Lbs. Twin start thread giving time saving due to the 2x faster setting. Avoid risk on overtorque. Supplied with ISO 6789 calibration certificate. Popular in automotive environment. Supplied in plastic protection tube.

Torque wrenches with touch and sound signals on reaching preset torque. Accuracy: +/- 4%Adjustment unit: 0,25 à 1N.mIncrements at 5°Automatic resetSupplied with an ISO 6789 calibration certificate

Torque wrenches with touch and sound signals on reaching preset torque. Accuracy: +/- 4%Adjustment unit: 0,25 à 1N.mIncrements at 5°Automatic resetSupplied with an ISO 6789 calibration certificate

Engraved on both sides.One edge in mm - One edge in 1/2 mm.Stainless steel 18 % Cr - 8 % Ni.Anti-reflection treatment.

Engraved on both sides.One edge in mm - One edge in 1/2 mm.Stainless steel 18 % Cr - 8 % Ni.Anti-reflection treatment.

Accuracy: Torque: ± 2% between 20% and 100% of the key capacity.Angle: ± 2 °. Measures: 9 x 12 and 14 x 18 mm.Measurement mode: peak or normal.Lockable keyboard (the operator has access only to the choice of the program and the memorization of the results).Unit of measurement: N.m, lbf.ft, lbf.in, Kg.cm and degrees.Possible pre-setting of 9 values of torque and / or angle.Memory of 250 values with PC USB connection.Supplied with ISO 6789 calibration certificate.Include ratchet in plastic box with foam tra

Flexibles und langes Modell Kopfdurchmesser 7 mm

Set of 19 feeler gauges (round tip): 0,04 --> 1,00 mm.Blade length: 150 mm.

Narrow, finely serrated tips with oval pipe-grip and side cutting edges.Cutting edges for copper and hard steel wire to a maximum specification of 1.6mm 160 kg/mm².185A: straight nose.195A: 40° angled nose.High durability Carbon alloy steel, with induction hardened cutting edges.Bi-Material ergonomic grips resistant to chemical agents featuring: - Return spring - Tether ready point (Tether point adds 10mm to nominal lenght)Chrome finish for corrosion resistance  

5 positions slip joint system.Unlock trigger allowing smooth & safe release.Easy to use & secure. Usable with 1 hand.Nose width 17 mm.Machined groove in upper jaw holds small round sections.506A model : 501A type with hinged tip, adapts to all grip configurations.Chromed finish.

1/2"-Antrieb = 12,7 mm Drehmomente: 400 Nm Durchmesser: 32 mm Oberfläche: verchromt

Hacksaw with adjustable blades position: 45° & 90°. Blade length: 300mmDelivered with 1 blade

Mallet Ø32mm with interchangeable tips Steel body with Hickory handleNylon and Themoplastic polyurethane tipsSpare tips available

Punch cutter set, ideal for cutting round gaskets Case of punch cutters Ø3 to 30mmCompass : Ø56 to 330mm

Chrome vanadium forged steel, treated 57 HRc on edge and 40 HRc on impact headBlade width: 26 mmLength: 235 mmLacqueredWeight: 240 gr

Tool storage organised in the drawers = productivity, comfort and safety. Dual colour high density foam: - Instant tool availability check. - Resistant to crushing, hydrocarbons, hydraulic fluids and detergents. Easy grip thanks to finger holes. Optimised tool holding during transport. See attached description sheet for content of module   

Tool storage organised in the drawers = productivity, comfort and safety. Dual colour high density foam: - Instant tool availability check. - Resistant to crushing, hydrocarbons, hydraulic fluids and detergents. Easy grip thanks to finger holes. Optimised tool holding during transport. See attached description sheet for content of module