Chassis Werkzeuge
Federpresssystem konzipiert für das Entfernen und Installieren der Feder von Gabel und Stoßdämpfer. Vielseitiges System mit vielen Möglichkeiten.Beinhaltet Adapter Ø45/47/50/53/56/59/62/66/68/71/75/77/80/83 & 87mm
Universal-Kit mit 3 Kegeln und 2 Muttern, das für fast alle Modelle von Motorrad- und Mopedfelgen verwendet werden kann.Adapter 1:Innerer Ø = 12mmÄußerer Ø = 80/100mm (konisch)Höhe = 40mmAdapter 2:Innerer Ø = 12mmÄußerer Ø = 60/80mm (konisch)Höhe = 38mmAdapter 3:Innerer Ø = 12mmÄußerer Ø = 40/60mm (konisch)Höhe = 38mm
Allows to extract the caliper pistons without damage. Ideal for the piston seals replacement. Capacity: 16,5 to 33mmLocking barLenght 240mm
Manual press to compress the fork springs.
Manual press to compress the fork springs.
Damper wrench to block the hydraulic fork cartridgeCross-headed bit
Damper wrench to block the hydraulic fork cartridgeCross-headed bit
For 8944988
3 breaking pin 2 riveting pin For Chain Breaker/Riveting Tool 8944992
Steering tube bearing installer on the triple clamps, Suitable for all the type of bearingsSupplied with 3 adaptorsFor bearings with inner Ø of 25 - 26 - 28 - 29 - 30 mm (1, 1-1/8 and 1-3/8)
To disassemble the steering stem bearing cups. Diameter 30 to 68 mm
Tools with expansion end to take out the bearing cups from the steering tube.
Tools with expansion end to take out the bearing cups from the steering tube.
Mini chain press tool to mate the 2 chain link plates.Technical characteristics:Capacity: 520 to 530.Caution: does not rivet the chain.
For 8944988
For 8944988
These tools are used to adjust the tension of the drive belt according to the manufacturer's recommendations. Recommended for Yamaha T-MAX 530 scooters
Manual press for shock absorber springs equipped with 4 adapters Ø60-66-72-75mm. Simple and efficient solution compatible with most shock absorbers.
Adjustable hook wrench equipped with a 3/8"" square drive for usingwith a torque wrench. Capacity: Ø 25 to 70mm
Adjustable hook wrench equipped with a 3/8"" square drive for using with a torque wrench.
Pull rod tool design allows for effortless retrieval of damping rod and bleed the fork. Compatible with forks Kayaba, Showa and WPDelivered with 4 adapters M10x1, M12x1, M12x1,25 and M14x1 Spare parts : Adapter M12x1 ref : 891102Adapter M12x1,25 ref : 891103
An essential professional tool for the replacement of secondary transmission chains.Designed to rivet hollow pin links in chain types type 520 to 532.Spare parts:Assembly plate: 893489Rivet punch: 893490.Stop support: 893491.
Designed for one-person operation for bleeding brakes. Simply push the supplied tube onto the bleed nipple and slightly loosen the bleed nipple, then depress the brake pedal slowly, which expels air and contaminated brake fluid, lock off the bleed nipple and then slowly release the brake pedal. Repeat this process until all traces of air in the tube have disappeared. The hose is fitted with a one-way valve preventing air returning into the brake lines whilst bleeding the brakes. 500ml capacity square bottle with a superior quality 600mm silicon hose.
Pneumatic brake bleeder equipped with 2 additional tanks with magnetic base. Delivered with hook system and 1/4"" BSP pneumatic fittingCapacity: 0.75L Spare plastic tips : 89402005