Lenker (28,6mm)
The 835-50 Street Fatbar® (BMW R GS/GSA AC) is more than just a handlebar, it is a performance upgrade that reduces fatigue, offering improved rider comfort helping to provide superior control for longer.Whether you’re tackling rough off-road trails or cruising down the open road, the 835-50 Street Fatbar® from Renthal® is the ultimate handlebar upgrade for your BMW GS.Trust the experts at Renthal to deliver the quality and performance that BMW riders demand.
Der 848-50 Street Fatbar® (Hon Africa Twin) wurde entwickelt, um die Geometrie der beliebten Honda CRF1100L / CRF1000L Africa Twin Adventure Bikes zu ergänzen.Entwickelt, um die Honda Africa Twin Lenker von 2016 und neuere Modelle entsprechen.Der 1-1/8in Street Fatbar® bietet Fahrern ein Upgrade, das die Vibrationen reduziert und überlegene Stärke bietet.Fatbar® verwendet computergestütztes Profilieren und ein fortschrittliches Schmiedeverfahren, um den zentralen Klemmdurchmesser (1-1/8 Zoll / 28,6 mm) auf den Standardsteuerungsdurchmesser (7/8 Zoll / 22,2 mm) zu verjüngen.
Der 848-50 Street Fatbar® (Hon Africa Twin) wurde entwickelt, um die Geometrie der beliebten Honda CRF1100L / CRF1000L Africa Twin Adventure Bikes zu ergänzen.Entwickelt, um die Honda Africa Twin Lenker von 2016 und neuere Modelle entsprechen.Der 1-1/8in Street Fatbar® bietet Fahrern ein Upgrade, das die Vibrationen reduziert und überlegene Stärke bietet.Fatbar® verwendet computergestütztes Profilieren und ein fortschrittliches Schmiedeverfahren, um den zentralen Klemmdurchmesser (1-1/8 Zoll / 28,6 mm) auf den Standardsteuerungsdurchmesser (7/8 Zoll / 22,2 mm) zu verjüngen.
Renthal handlebars are renowned worldwide for their quality. Their design takes account of numerous factors that meet riders' demands. They are used by the leading MX, SX and S MX teams and riders.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
The Renthal Fatbar® features a tapered outer wall resulting in a 1 1/8” (28.6mm) clamping diameter and 7/8"" diameter at the control ends. This profiled wall and braceless design combines excellent strength with good flexibility. KTM and Suzuki have chosen the Renthal Fatbar® as the ultimate braceless handlebar and fit them as original equipment where this design is preferred within their range. Aluminium 7010 T6Anodised finishPositioning grid (laser engraving) Fatbar Pad included
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
The Renthal Fatbar® features a tapered outer wall resulting in a 1 1/8” (28.6mm) clamping diameter and 7/8"" diameter at the control ends. This profiled wall and braceless design combines excellent strength with good flexibility. KTM and Suzuki have chosen the Renthal Fatbar® as the ultimate braceless handlebar and fit them as original equipment where this design is preferred within their range. All Fatbar® are anodized and laser engraving have a registration for positioning
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
The Renthal Fatbar® features a tapered outer wall resulting in a 1 1/8” (28.6mm) clamping diameter and 7/8"" diameter at the control ends. This profiled wall and braceless design combines excellent strength with good flexibility. KTM and Suzuki have chosen the Renthal Fatbar® as the ultimate braceless handlebar and fit them as original equipment where this design is preferred within their range. Aluminium 7010 T6Anodised finishPositioning grid (laser engraving) Fatbar Pad included
The Renthal Fatbar® features a tapered outer wall resulting in a 1 1/8” (28.6mm) clamping diameter and 7/8"" diameter at the control ends. This profiled wall and braceless design combines excellent strength with good flexibility. KTM and Suzuki have chosen the Renthal Fatbar® as the ultimate braceless handlebar and fit them as original equipment where this design is preferred within their range. Aluminium 7010 T6Anodised finishPositioning grid (laser engraving) Fatbar Pad included
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Fatbars are large-diameter (28.6mm), unbraced, profiled handlebars that are very tough and comfortable. All fatbars are anodised, with laser etchings to indicate the position. Foam included.
Renthal fatbar handlebars are profiled without a central bar and with a diameter of 28.6mm. They have a larger diameter than usual, for greater resistance to impacts and improved comfort. 672 type fatbarBlack anodised finishLaser etched markings: precise positioning and adjustment markingsFoam included
Renthal® Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter (1-1/8"" | 28.6mm) to be larger than the control ends (7/8"" | 22.2mm). Strength for the bar is created within the tapered wall profile allowing for a braceless design. This enables a confident level of flexibility in the handlebar. Anodized handlebarLaser prints to set precisely handlebarSizes :A (Width) : 819B (Height) : 100C (Rise) : 58D (Clamp area) : 80E (Sweep) : 47F (Control length) : 211 Renthal® Fatbar® sind die marktführenden unverstrebten Lenker. Das konische Wandprofil ermöglicht es, dass der Klemmdurchmesser (1-1/8"" | 28,6mm) größer ist als die Steuerenden (7/8"" | 22,2mm).Die Festigkeit der Stange wird durch das sich verjüngende Wandprofil erzeugt, was ein steifenfreies Design ermöglicht. Dies ermöglicht ein hohes Maß an Flexibilität des Lenkers. Eloxierter LenkerLaserdrucke zur präzisen Einstellung des LenkersGrößen :A (Breite) : 819B (Höhe) : 100C (Steigung) : 58D (Klemmbereich) : 80E (Ausschlag) : 47F (Kontrolllänge) : 211
Renthal® Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter (1-1/8"" | 28.6mm) to be larger than the control ends (7/8"" | 22.2mm). Strength for the bar is created within the tapered wall profile allowing for a braceless design. This enables a confident level of flexibility in the handlebar. Anodized handlebarLaser prints to set precisely handlebarSizes :A (Width) : 819B (Height) : 100C (Rise) : 58D (Clamp area) : 80E (Sweep) : 47F (Control length) : 211 Renthal® Fatbar® sind die marktführenden unverstrebten Lenker. Das konische Wandprofil ermöglicht es, dass der Klemmdurchmesser (1-1/8"" | 28,6mm) größer ist als die Steuerenden (7/8"" | 22,2mm).Die Festigkeit der Stange wird durch das sich verjüngende Wandprofil erzeugt, was ein steifenfreies Design ermöglicht. Dies ermöglicht ein hohes Maß an Flexibilität des Lenkers. Eloxierter LenkerLaserdrucke zur präzisen Einstellung des LenkersGrößen :A (Breite) : 819B (Höhe) : 100C (Steigung) : 58D (Klemmbereich) : 80E (Ausschlag) : 47F (Kontrolllänge) : 211
Renthal® Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter (1-1/8"" | 28.6mm) to be larger than the control ends (7/8"" | 22.2mm). Strength for the bar is created within the tapered wall profile allowing for a braceless design. This enables a confident level of flexibility in the handlebar. Anodized handlebarLaser prints to set precisely handlebarSizes :A (Width) : 819B (Height) : 100C (Rise) : 58D (Clamp area) : 80E (Sweep) : 47F (Control length) : 211 Renthal® Fatbar® sind die marktführenden unverstrebten Lenker. Das konische Wandprofil ermöglicht es, dass der Klemmdurchmesser (1-1/8"" | 28,6mm) größer ist als die Steuerenden (7/8"" | 22,2mm).Die Festigkeit der Stange wird durch das sich verjüngende Wandprofil erzeugt, was ein steifenfreies Design ermöglicht. Dies ermöglicht ein hohes Maß an Flexibilität des Lenkers. Eloxierter LenkerLaserdrucke zur präzisen Einstellung des LenkersGrößen :A (Breite) : 819B (Höhe) : 100C (Steigung) : 58D (Klemmbereich) : 80E (Ausschlag) : 47F (Kontrolllänge) : 211
Renthal® Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter (1-1/8"" | 28.6mm) to be larger than the control ends (7/8"" | 22.2mm). Strength for the bar is created within the tapered wall profile allowing for a braceless design. This enables a confident level of flexibility in the handlebar. Anodized handlebarLaser prints to set precisely handlebarSizes :A (Width) : 819B (Height) : 100C (Rise) : 58D (Clamp area) : 80E (Sweep) : 47F (Control length) : 211 Renthal® Fatbar® sind die marktführenden unverstrebten Lenker. Das konische Wandprofil ermöglicht es, dass der Klemmdurchmesser (1-1/8"" | 28,6mm) größer ist als die Steuerenden (7/8"" | 22,2mm).Die Festigkeit der Stange wird durch das sich verjüngende Wandprofil erzeugt, was ein steifenfreies Design ermöglicht. Dies ermöglicht ein hohes Maß an Flexibilität des Lenkers. Eloxierter LenkerLaserdrucke zur präzisen Einstellung des LenkersGrößen :A (Breite) : 819B (Höhe) : 100C (Steigung) : 58D (Klemmbereich) : 80E (Ausschlag) : 47F (Kontrolllänge) : 211
Renthal® Fatbar® are the market leading unbraced handlebar. Featuring a tapered wall profile enables the clamping diameter (1-1/8"" | 28.6mm) to be larger than the control ends (7/8"" | 22.2mm). Strength for the bar is created within the tapered wall profile allowing for a braceless design. This enables a confident level of flexibility in the handlebar. Anodized handlebarLaser prints to set precisely handlebarSizes :A (Width) : 819B (Height) : 100C (Rise) : 58D (Clamp area) : 80E (Sweep) : 47F (Control length) : 211 Renthal® Fatbar® sind die marktführenden unverstrebten Lenker. Das konische Wandprofil ermöglicht es, dass der Klemmdurchmesser (1-1/8"" | 28,6mm) größer ist als die Steuerenden (7/8"" | 22,2mm).Die Festigkeit der Stange wird durch das sich verjüngende Wandprofil erzeugt, was ein steifenfreies Design ermöglicht. Dies ermöglicht ein hohes Maß an Flexibilität des Lenkers. Eloxierter LenkerLaserdrucke zur präzisen Einstellung des LenkersGrößen :A (Breite) : 819B (Höhe) : 100C (Steigung) : 58D (Klemmbereich) : 80E (Ausschlag) : 47F (Kontrolllänge) : 211
The Renthal Fatbar® features a tapered outer wall resulting in a 1 1/8” (28.6mm) clamping diameter and 7/8" diameter at the control ends. This profiled wall and braceless design combines excellent strength with good flexibility. KTM and Suzuki have chosen the Renthal Fatbar® as the ultimate braceless handlebar and fit them as original equipment where this design is preferred within their range. Aluminium 7010 T6 Anodised finish Positioning grid (laser engraving) Fatbar Pad included