HIGHSIDER pro 7 Inch Main Headlight Insert Type 2 LED Black E-Approved (1pc)

HIGHSIDER pro 7″ LED Headlight Insert TYPE 2

This round, black or chrome reflector has high beam, low beam and parking light functions and emits an asymmetrical luminous flux – only approved for right-hand traffic – E-approved.

See and be seen Give your bike an unmistakable style!

Dimension :
Diameter A = 176 mm
Diameter GA = 165 mm
Diameter I = 160 mm
Diameter Heat sink K = 99 mm
T = 81 mm
R = 8 mm

Technical data:
Power consumption at 12,5 Volt DC:
Dipped beam: approx. 1.6 amperes (20 watts).
12 volts 1450 lumens
Only the upper reflector and the middle ellipsoid insert are lit.

High beam: approx. 1.6 amperes (20 watts).
12 volts 1582 lumens
Only the upper and lower reflectors are lit. The middle ellipsoid insert stops when the headlight flashes.

Connections:
The following 3 cables end in a combination plug:
Black = ground (-)
Red = plus high beam (+).
Blue = Plus low beam (+).
Additional 2 cables for parking light:
Black = Ground (-)
Red = Parking light (+)
White= Connection for control indicator (can be used optionally)

Scope supplied: 1 piece

Notes:
Asymmetrical use, approved for right-hand traffic only.
The reflector can also be ordered complete with black housing:
Art.-No. 1108496003.