HIGHSIDER pro 5 3/4 Inch Headlight Pecos Type 12 LED Black Side Mount, With DRL

HIGHSIDER pro 5 3/4 inch LED headlight PECOS TYPE 12 with TFL, E-approved

The robust, puristically shaped headlight with matt black metal housing has a daytime running light in addition to high beam, low beam and parking light.

The PECOS TYPE 12 is characterized by the latest lighting technology and the unusual light design.
The daytime running light for even greater visibility in road traffic.
A black cover divides the reflector into an upper and lower half.
The low beam lights up in the upper half of the reflector and the lower half also lights up when the high beam is switched on.
The parking light forms the outer ring around the reflector.
The simple design is ideal for classic cars, roadsters and custom bikes.

Sensational - give your bike an unmistakable style!
The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!

Features:
- Light source: LED
- Glass: clear
- Housing: matt black metal housing
- Reflector: chrome-plated with TFL/DRL and parking light ring
- Mounting point: on the side of the housing

Dimensions:
- Housing Ø: 165mm
- Inner Ø of the ring: 136mm
- Total depth: 135mm (incl. glass)
- Weight: 1250g
- Thread: M8
- Housing depth: approx. 75mm (measured from the center of the side mounting holes to the back)
- Distance side mounting points: approx. 160mm

Connectors

3-pin plug:
- Red = low beam (+)
- White = High beam (+)
- Black = earth (-)

Separate cables:
- Blue = TFL/DRL (+) to ignition positive
- Brown = parking light (+)

Power consumption:
- Low beam: 17.55W at 13.5V, 1.3A
- High beam: 18.9W at 13.5V, 1.4A
- TFL: 10.8W at 13.5V, 0.8A
- Position light: 1.35W at 13.5V, 0.1A

Scope of delivery: 1 piece

Can be ordered optionally:
- HIGHSIDER pro DRL CONTROL- BOX CB1 , Daytime running light control box for vehicles without light switch, 12V Item no.: 208-108
- Light switch on/off with clamp for handlebar mounting e.g. item no.: 240-044

Please note:
If this product in conjunction with the HIGHSIDER pro DRL CONTROL BOX CB1 (208-108) causes the headlight not to switch on the daytime running light after starting the engine, please proceed as follows:
Install the enclosed 120 Ohm resistor as specified in the instructions.
The headlight should now also switch on the daytime running light.