KOSO DL-04 Meter Unlimited

• KOSO DL-04 Meter unlimited

  Specifications (R = Range / U = Unit)

  Speedometer

  • R: 0 ~ 225 MPH (0 ~ 360 km/h), switchable

  • U: 1 MPH or km/h

  Odometer

  • R: 0 ~ 99,999 miles (km)

  • U: 1 mile (km)

  Tripmeter

  • R: 0 ~ 9,999.9 miles (km)

  • U: 0.1 miles (km)

  Tripmeter O (Oil change)

  • R: 0 ~ 9,999.9 miles (km)

  • U: 0.1 miles (km)

  Tripmeter A (Service)

  • R: 0 ~ 9,999.9 miles (km)

  • U: 0.1 miles (km)

  Oil change interval

  • R: 300 ~ 10,000 miles (3,000 ~ 16,000 km)

  • U: 100 miles (km)

  • Automatic reduction

  • Warning: Text turns red at ≤ 0 miles (km)

  High speed warning

  • R: 18 ~ 225 MPH (30 ~ 360 km/h)

  • U: 1 MPH or km/h

  Gear indicator

  • R: N, 1 ~ 6

  Tachometer

  • R: 0 ~ 10,000 RPM / 0 ~ 15,000 RPM

  Shift light

  • R: 5,000 ~ 15,900 RPM

  • U: 100 RPM

  Temperature

  • R: 32 ~ 482 °F (0 ~ 250 °C)

  • U: 1°C (1°F)

  Temperature warning

  • R: 140 ~ 482 °F (60 ~ 250 °C)

  • U: 1°C (1°F)

Voltmeter

• R: 8.0 ~ 18.0 V

Low voltage warning

• R: 8.0 V ~ 12.5 V

• U: 0.1 V

Hour meter

• R: 0.0 ~ 9999.9 hours

• U: 0.1 hours (6 minutes)

Hour counter 1 - 2

• R: 0.0 ~ 9999.9 hours

• U: 0.1 hours (6 minutes)

Low oil indicator A

• R: 0.0 ~ 9999.9 hours

• U: 0.1 hours (6 minutes)

Recorded maximum values

• Speed: 0 ~ 360 km/h (0-225 MPH)

• RPM: 0 ~ 15,000 RPM

• Temperature: 0 ~ 250 °C (32 ~ 482 °F)

• Voltage: 8.0 ~ 18 V

• Gear: N / 1 ~ 6

Clock

• Format: 12 H or 24 H

Backlight brightness

• R: 1 ~ 5 (darkest to brightest)

Voltage

• DC 12V

Temperature range

• -10 ~ +60 °C

Standard

• JIS D 0203(S2)

Dimensions

• Diameter: 96 mm

Weight

• approx. 194.5 g

Warning lights

• Turn signal (green)

• Engine warning (yellow)

• High beam (blue)

• Neutral (green)

• Warning (red)

• ABS (yellow)

• Shift light (red)

Contents:

• LCD meter – 1×

• Main wiring harness – 1×

• Active RPM sensor – 1×

• RPM cable (Type A) – 1×

• RPM cable set (Type B) – 1×

• Extension wire – 1×

• Temperature sensor – 1×

• External switch (double button type) – 1×

• Rubber strip – 1×

• Speed sensor bracket M8 / S-type – 1×

• Speed sensor bracket M10 / S-type – 1×

• Hex screw M5 × 5L × P0.8 – 2×

• 2.5 mm hex key – 1×

• 3 mm hex key – 1×

• Meter bracket – 1×

• Screw M5 × 12L – 3×

• Washer M5 – 3×

• Allen screw M6 × 35L – 2×

• Allen screw M8 × 30L – 2×

• Bushing M6 – 2×

• Bushing M8 – 2×