Verteilung und Lagerung

Spring loaded push button action pump with metal hose end, ideal for precise topping up of difficult-to-access points on vehicles in the workshop. Drain-off hole for storing dispensing tube to avoid leakage after use.  Suitable for engine oils, transmission fluids, brake fluids and general purpose cleaners. It is particularly suitable for brake fluids as the brake fluid reservoir is quite narrow.

Eight pattern gun with trigger grip handle and reservoir to hold liquid soap or pesticide/fertiliser. Reservoir holds 100ml/3.1/2 oz of liquid with control button to alter mix. Ideal for fertilising gardens or washing cars. Nozzle can be adjusted to give eight patterns: shower, mist, cone, rinse, stream, flat, centre and jet.

To compensate for different threads. Outer thread 2? Trisure (coarse), inner thread 2? BSP (fine). Suitable for Motul 60 liter containers, 208 liter barrels of coolants and windscreen cleaners.

Manual pump for barrel. • For 60 and 208 liter oil barrels. 

Vergaserreiniger. Entfernt effektiv Ablagerungen und Verharzungen an Drosselklappen, Drehschiebern, Vergaserdüsen, Schwimmern und Venturi-Rohren.

Vergaserreiniger. Entfernt effektiv Ablagerungen und Verharzungen an Drosselklappen, Drehschiebern, Vergaserdüsen, Schwimmern und Venturi-Rohren.

Pneumatic piston pump with manual flow meter and trolley for 208 liter barrels (non-calibratable). Pump 3:1, trolley assembly, pumping rate max. 30 liter/min (depends on viscosity), air pressure 3-10 bar, 4 m pressure hose NW 16, G 3/4?/suction pipe with foot valve, non-calibratable digital flow meter, outlet with anti-drip spout.

Pneumatic piston pump with manual flow meter and trolley for 60 liter barrels (non-calibratable). Pump 3:1, pumping rate max. 30 liter/min (depends on viscosity), air pressure 3-10 bar, 3 m pressure hose NW 16, G 1/2?/suction pipe with foot valve, non-calibratable digital hand flow meter, outlet with anti-drip spout.

Durchflussmenge (l/Hub): 0,1 Durchflussmenge bei 60 Hüben/min (l/min): 6 Flüssigkeiten: Öle bis SAE 140 Anwendung: 60 / 200 / 220 l Fässer Auslauf: Tülle, gesichert durch Ringschraube Saugrohrlänge (mm): 840 Oberflächenbehandlung: Alle Stahlteile galvanisch verzinkt Trommelspund: 2'' G M und M 64x4 M Pumpenkopf: Zinkdruckguss - schlagfest Pumpenkörper: Stahl Dichtungen: NBR Gewicht (kg): 1.63

Brass tap for barrels 60 & 200L.